Car polishing is an important maintenance process that is highly recommended and serves to keep the body neat and shiny as well as to have a protective function for the car upholstery.
There are several ways to polish your car but they all start from the same point: the correct washing. A good wash allows, in addition of course to eliminate dirt, to remove stains and halos that would cause enormous discomfort during polishing.
Before washing the car, make sure that the car is in a shaded area and remains there for as long as necessary for the washing. If the place is cool it’s even better. In the washing phase, when you apply the soap or car shampoo, the sun dries the liquid very quickly, making sure that it releases stains and halos.
To proceed with washing get:
- two buckets full of water;
- car shampoo;
- a special soft sponge
The best method for washing the car is the recommended method of the two buckets, wherein the first there is water and the right amount of car detergent, while in the second only water for rinsing.
In the store, choose a soft sponge suitable for cars or microfibre. Other sponges, such as those used for personal cleaning or even coarse cloths, could damage the bodywork.
Pass the sponge soaked in water and car shampoo starting from the roof, then go down on the sides and finally on the rims.
Constantly apply circular motions, paying particular attention to areas where dirt can accumulate, such as inside the radiator grille and in the corners of the bodywork.
After the soaping phase, rinse the sponge in the second bucket and always proceed from top to bottom to remove all the car soap.
Also be careful to always use products designed specifically for the car; household detergents are too aggressive and could ruin the paint on the machine.
Machine polishing by hand
There are multiple methods to properly polish your car, of which the most accurate is undoubtedly hand polishing. Among the different possible methods, it must be said that hand polishing is the most tiring and also takes the longest time. But on the other hand, it guarantees an exceptional result, since you can easily get to the most difficult points of the car.
Secondly, hand polishing will give you the satisfaction that is practically out of the ordinary, the result of the attention you put into it.
To carry out this process you will need:
- soft cloth ;
- polish paste suitable for bodywork;
- protective wax.
Once the washing phase of the machine is finished, we move on to the polishing operations. First of all, you need to apply the first layer of polish.
The polish, in case you didn’t know, is a slightly abrasive paste that must be inserted in the imperfection points of the bodywork in order to eliminate small scratches.
Furthermore, due to its conformation, the polish also serves to spread a protective veil on the parts where it is spread, in this way the car is protected from small bumps and wear from atmospheric agents.
Once you have chosen the polish that best suits your needs, a small amount of product should be applied and spread using the cloth with light circular movements.
To ensure a professional result, arm yourself with patience and a great desire to do and spread the layer of polish on the entire body of the machine, in this way you will have a uniform and very pleasant aesthetic effect to look at. The polish is also the product par excellence in car polishing since its correct drafting guarantees an optimal result.
Be careful to use the right amount of product and spread it evenly through circular movements, otherwise, instead of a polishing effect, you will get an opacification of the bodywork.
Once the polish layer has been completely absorbed by the bodywork, apply a layer of protective wax to obtain a professional result . The protective wax serves to provide a new, much stronger layer against anything that could damage the bodywork.
Polish the car with the polisher
The polisher is the ideal tool to use in polishing the bodywork since it guarantees a more uniform result on the whole car and allows you to complete the job in a much shorter time.
The procedure, in this case, is very similar to hand polishing and to do this you will need:
- protective wax
- possibly a soft cloth
First of all, you have to wash the car in the manner indicated and dry it thoroughly.
Prepare the polishing machine first with the right pad then take the polish. As in hand polishing, the polish should only be applied in small quantities at a time on the affected area of the car.
Once the product has been inserted, use the polisher at various speeds.
The movement of polishing with this tool is the same as polishing by hand: the doses of polish should be applied following a circular motion. The movement of the polisher allows you to apply more pressure to the polish, which will then heat up and spread more quickly.
Be careful not to stay in the same area for too long, otherwise, you could create streaks and damage to the paint.
Once the work is completed, apply the protective wax layer in the same way and you will have obtained an optimal result for your car in a few hours.
The polisher, among its strengths, allows you to constantly apply a greater force than polishing by hand to the entire area of the bodywork. This way the layers of products will be spread much more evenly which will lead to a better result.
However, it should be emphasized that the polisher struggles to get to the most difficult points, which is why it is also good to opt for a hand pass in certain areas.
A well-cleaned and the polished car is a car that looks great and will last longer. The bodywork, once damaged with scratches, chips, or scratches, can be damaged very quickly. Spending some time cleaning and polishing the car can be very cost-effective over time.